|Shape of Installation||ALL|
|Tape Width||1.5" Wide 2.0" Wide Custom Size|
|Roll Length||25 ft. Roll|
|Base Fabric||Polyester Taffeta Fabric|
|Coating||Nickel Over Copper|
|Temperature Range||-40° to 121°C (-40° to 249.8°F)|
|Surface Resistivity||<0.1 ohms/sq|
|Tensile Strength||74-79 lbs/in|
|Adhesion (24hr.)||55 oz/in. (to steel)|
|Electrical: AC Impedence||.044 ohms (500 Hz - 100 KHz)|
|Electrical: Current Capacity||1 Amp/sq-in|
|Electrical: Resistance||<.049 ohms (1.0 sq-in)|
|Particles||Silver coated Nickel|
|Release Liner||Polycoated Paper Liner|
|Shelf-Life||12 months, unbonded (Zippertubing)|
|Solvent Resistance||Poor (soften & swell and is removable with chlorinated & aromatic solvents and Ketones)|
|Temperature Range||70°C Days/Weeks 121°C Minutes/Hours|
Specifications subject to change without notice. All statements and technical information contained herein are based on tests we believe to be reliable, but the accuracy or completeness is not guaranteed under all circumstances. Before using Zippertubing® products, the user shall determine suitability for the intended use, and user assumes all responsibility for improper selection. Published attenuation values of Zippertubing® shielding have been verified by laboratory testing of the respective shielding materials. Actual installed attenuation values may differ due to installation techniques and final assembly operation parameters which are beyond the control of Zippertubing®. Actual attenuation values can only be determined by the end user testing the completed assembly. U.S. and International Patents and patents pending. © 2017 The Zippertubing® Company, Chandler, Arizona.
ZT-Shield® (3250) is a combination of fire retardant Polyurethane ZT-Tape® stagger bonded to a layer of Z-3250-CN shielding fabric with an electrically conductive adhesive backing. When spirally wrapped around electrical wires or other items using a 50% overlap technique, this product will provide a finished installation with excellent electromagnetic shielding characteristics. This product features a shield coverage of 98 percent and a flame-retardant Polyurethane insulation jacket with good dielectric strength.
This tape eliminates the need to go back over a shielded assembly a second time to apply a protective dielectric insulator. ZT-Shield® (3250) also referred to as Shielded ZT-Tape® is available in multiple widths to accommodate most wire harness diameters.
This product has an operational temperature range of -50° to 80°C (-58° to 176°F).