ISO/TS 16949 ISO 9001
Building Quality Products & Solutions Since 1957

The Zippertubing Company Website is currently under construction. This website will have limited functionality for the time being.

Share

Favorite

Zip-Mesh (CU)

Drawing No. ZT98-03-00

Part No. ZT98-03-002-1.0-X196.8-2U

EMI Shielding Tape, SnCu Mesh/Copper Foil, Adhesive Backed

  • Excellent Shielding Characteristics
  • Flexible & Formable Foil
  • Adhesive Backing
  • Economical
  • Low Electrical Resistance

Product Specifications

Closures Adhesive Backing
Conductivity .05 ohms/ft
Flame Retardant Not Flammable
Flexibility Medium
Fluid Resist Good, Mild Solvents
Material Thickness 0.040"
Material Type Sn/Cu Mesh Wrapped Copper Foil
RoHS Compliant
Shelf-Life 12 months
Sizes 1.0" & Up Tape Width
Temperature Range -40° to 175°C (-40° to 347°F)
Shape of Installation ALL
Tape Width 1.0" Wide
Roll Length 16.4 ft. Roll
Shielding Copper Foil 36 AWG Wire Mesh
Closure Adhesive
Units Per Box 2 Roll Pack 3 Roll Pack

Material Specifications

Specifications subject to change without notice. All statements and technical information contained herein are based on tests we believe to be reliable, but the accuracy or completeness is not guaranteed under all circumstances. Before using Zippertubing® products, the user shall determine suitability for the intended use, and user assumes all responsibility for improper selection. Published attenuation values of Zippertubing® shielding have been verified by laboratory testing of the respective shielding materials. Actual installed attenuation values may differ due to installation techniques and final assembly operation parameters which are beyond the control of Zippertubing®. Actual attenuation values can only be determined by the end user testing the completed assembly. U.S. and International Patents and patents pending. © 2017 The Zippertubing® Company, Chandler, Arizona.

EMI Shielding Tape, SnCu Mesh/Copper Foil, Adhesive Backed

Zip-Mesh™ (Cu) (also known as "strawberry tape") is a flexible, easy-to-use EMI Shielding tape of two-ply, woven Tinned-Copper mesh, separated by Copper polyester tape, with a self-adhesive material on one side. The material offers very low electrical resistance and is intended to complement Zippertubing's "SH1" Foil and "SHX" Series of knitted wire mesh EMI Shields.

The tape allows joining of EMI Shielded jacket sections at cable splices, branch-outs and the transition to connector hardware. The standard tape width is 1.0 inch with other sizes available on a custom basis.

This product has an operational temperature range of -40° to 175°C (-40° to 347°F).

Speak to an Engineer Today!

We have highly experienced and friendly engineers on site ready to assist you in all your projects