ISO/TS 16949 ISO 9001
Building Quality Products & Solutions Since 1957

The Zippertubing Company Website is currently under construction. This website will have limited functionality for the time being.

Share

Favorite

PRT® (Transition)

Drawing No. ZT05-04-003

Part No. ZT05-04-003-01-B-X6.0

PRT® Transition Boot Heat Shrink Wrap


Product Specifications

RoHS Compliant
Shelf-Life 24 months
Shape of Installation Round
Backshell Diameter 0.375" - 0.5" (#01) 0.5" - 0.625" (#03) 0.625" - 0.75" (#05) 0.75" - 0.875" (#07) 0.875" - 1.0" (#09) 1.0" - 1.125" (#11) 1.125" - 1.25" (#13) 1.25" - 1.5" (#15)
Unit Length 6 inch pieces
Exterior Material Polyolefin Heat Shrink
Closure Adhesive
Material Color Black

Material Specifications

Specifications subject to change without notice. All statements and technical information contained herein are based on tests we believe to be reliable, but the accuracy or completeness is not guaranteed under all circumstances. Before using Zippertubing® products, the user shall determine suitability for the intended use, and user assumes all responsibility for improper selection. Published attenuation values of Zippertubing® shielding have been verified by laboratory testing of the respective shielding materials. Actual installed attenuation values may differ due to installation techniques and final assembly operation parameters which are beyond the control of Zippertubing®. Actual attenuation values can only be determined by the end user testing the completed assembly. U.S. and International Patents and patents pending. © 2017 The Zippertubing® Company, Chandler, Arizona.

PRT® Transition Boot Heat Shrink Wrap

PRT® Transition Boots are wrap around, heat shrinkable boots that provide a protective cover and strain relief from a Connector Backshell to the primary wire bundle. The transitions are ideal for in-service electrical system modifications as they eliminate the need to remove or disassemble the associated connectors and hardware. They can eliminate the need for expensive, specialty molded boots and in some cases minimize the heavy wall thickness that results when using high expansion ratio tubing. A Hot Air heat gun is used to recover the boots in the same manor as standard, non-split, tubing or molded boots. Wrap-a-round transition boots are ideal for assemblies with non removable electrical connectors. This material has an operational temperature range of -55° to 135°C.

Speak to an Engineer Today!

We have highly experienced and friendly engineers on site ready to assist you in all your projects