|Shape of Installation||Flat Rectangle Round|
|Cable Diameter||0.375" 0.5" 0.625" 0.75" 0.875" 1.0" 1.125" 1.25" 1.375" 1.5" 1.625" 1.75" 1.875" 2.0" 2.125" 2.25" 2.375" 2.5" 2.625" 2.75" 2.875" 3.0" 3.125" 3.25" 3.375" 3.5" 3.625" 3.75" 3.875" 4.0"|
|Material Overlap||Inside Overlap - IOL No Overlap Flap|
|Copper Corrosion||Mil-C-27072 & 13777|
|Dielectric Constant||5.0 - 6.0|
|Dielectric Strength||900 volts/mil|
|Flame Retardant||UL 94 V-0|
|Fungicide||Mil-Std-810, Method 508.3|
|Mil-Spec||Mil-C-27072; Mil-C-13777; Mil-I-3930/21|
|Temperature Range||-55° to 107°C (-67° to 224.6°F)|
|Tensile Strength||4,000 psi.|
|External Closure Features||No|
|Temperature Range||-37° to 90°C (-34.6° to 194°F)|
|Tool Required||Yes (Upgraded Plier Tool Available)|
|Bundle Size||Small - Medium (Typical Bundle Size: 3/8" - 4.0")|
|Ideal Application||Round jackets <4" in diameter that require a strong and flexible closure.|
|Shape of Installation||Round|
|Exterior Material||Polyether-type Polyurethane|
|Composition||Polyether type, thermoplastic Polyurethane compound (TPU)|
|Used As A Single Extrusion||No|
|Roll Length||Up to 200 feet continuous|
Specifications subject to change without notice. All statements and technical information contained herein are based on tests we believe to be reliable, but the accuracy or completeness is not guaranteed under all circumstances. Before using Zippertubing® products, the user shall determine suitability for the intended use, and user assumes all responsibility for improper selection. Published attenuation values of Zippertubing® shielding have been verified by laboratory testing of the respective shielding materials. Actual installed attenuation values may differ due to installation techniques and final assembly operation parameters which are beyond the control of Zippertubing®. Actual attenuation values can only be determined by the end user testing the completed assembly. U.S. and International Patents and patents pending. © 2017 The Zippertubing® Company, Chandler, Arizona.
Zip-On® (PFR) is a high performance wrap around cable management jacketing system constructed of a soft, flexible, rubber-like polymer for applications where mechanical protection, flexibility, fluid resistance or low smoke and no toxic gas generation requirements apply. This solution is exceptionally tough while exhibiting unusually high flexibility throughout its temperature range.
The Z-Track® (PFR) closure allows easy installs on in-service equipment and is constructed of poly(ether) urethane material allowing this cable and wiring jacketing system to be used in airborne and shipborne applications. Zip-On® (PFR) should be your first choice for demanding environment applications or where PVC materials are unacceptable.
This product comes in Round, Flat and Rectangle configurations and can be cut to size during installs and field retrofits. This exceptionally tough yet flexible jacketing systems is great for many different demanding environments such as nuclear, aerospace and military applications.
The Zip-On® family of cable management products are as easy to install as they are to re-open. Whether you are in the field or in the office, the convenience and functionality of Zippertubing's Zip-On® solutions will more than satisfy your cable bundling and protection needs. These products are available in a variety of materials, colors, shapes and sizes.
Any of the Zip-On® pressure tracks are easy to install on your application thanks to the available plier and slider tools. The plier tools are great for long cable runs, while the slider tools are better for those shorter cable runs.
Refer to Zippertubing's PFR data sheet below for specific material characteristics.