Viton®

3

A military-grade, flame-retardant, and fluid-resistant rubber-like heat shrink tubing.
  • Meets MIL-DTL-23053/13 and MIL-R-46846, Type III, Class 1
  • Excellent fluid resistance
  • Can be exposed to temperatures up to 392°F

Material Specification No. 6006

Raw materials are not sold separately, please contact the sales department for any special requirements.

Details

Viton® is a heat shrink tubing that is military-grade and can handle high and extremely low temperature conditions.

Viton® is a cross-linked fluoroelastomer heat shrink tubing material. The rubber-like material is fluid resistant and copper corrosion resistant. The material meets MIL-DTL-23053/13 and MIL-R-46846, Type III, Class 1, making this heat shrink an ideal choice for the military. Viton® is used for our Shrink-N-Shield® (FE), an EMI shielding heat shrink solution that is perfect for severe-duty applications. Viton® has an operational temperature range of -67°F to 392°F (-55°C to 200°C).


Specifications

Viton®

Flammability Mil-DTL-23053, 15 sec (max)
Dielectric Strength 200v/mil (after shrink)
Fluid Resistance Excellent
REACH Compliant
RoHS RoHS-10
Abrasion Resistance Best
Elongation 250% (after shrink)
Shielding Effectiveness Moderate
Jacket Abrasion Resistance Best
Shrink Ratio 2:1
Material Flexibility Best
Min Temperature Extreme
Minimum Operating Temperature -67 ° F (-55 ° C )
Max Temperature Extreme
Max Temperature Moderate
Maximum Operating Temperature 392 ° F (200 ° C )
Tensile Strength 1200 psi (after shrink)
Flexibility Best

Available Attributes

Material Color Black

Specifications subject to change without notice. All statements and technical information contained herein are based on tests we believe to be reliable, but the accuracy or completeness is not guaranteed under all circumstances. Before using Zippertubing® products, the user shall determine suitability for the intended use, and user assumes all responsibility for improper selection. Published attenuation values of Zippertubing® shielding have been verified by laboratory testing of the respective shielding materials. Actual installed attenuation values may differ due to installation techniques and final assembly operation parameters which are beyond the control of Zippertubing®. Actual attenuation values can only be determined by the end user testing the completed assembly. U.S. and International Patents and patents pending. © 2021 The Zippertubing® Company, Chandler, Arizona.