Z-7200-C

3

Non-Magnetic, Halogen-Free and Hypoallergenic Conductive EMI Shield Cloth
  • Nickel Free & Hypoallergenic
  • Fray Resistant
  • High Flexibility
  • Avg. 60dB Attenuation (10MHz-18GHz)
  • -40° to 150°C Temperature Range
  • Can be incorporated into most ZT products

Material Specification No. 3211

Raw materials are not sold separately, please contact the sales department for any special requirements.

Details

Z-7200-C EMI Shielding fabric is a .005 inch thick woven Copper plated Nylon rip stop material with a proprietary Silver colored, non-magnetic corrosion resistant top coating. This product is fray resistant and contains no Nickel. Z-7200-C is Halogen Free and Hypoallergenic. The product is ideal for EMI shielding assemblies that cannot contain magnetic materials or where the shield will be handled extensively. Non-magnetic shielding materials are extremely useful in EMI hardening components of sensitive GPS navigation systems and earthquake monitoring equipment that are easily upset by nearby magnetic materials. Z-7200-C will not cause skin irritation like similar Nickel plated products. The thin woven construction makes it extremely flexible, yet very strong and is capable of operational temperatures of -40° to 150°C (200°C/minutes). Z-7200-C will provide shielding attenuation levels averaging 60dB from 10MHz to 18GHz. Z-7200-C can be incorporated on a custom basis into numerous Zippertubing standard product types like Z-Shield, Shrink-N-Shield, PRT-S, Shielded ZT-Tape and any of our standard jackets/closure types.


Specifications

Z-7200-C

Break Strength 25 x 50 lbs/in
Chemical Resistance Good
Dielectric (volts/mil) Conductive <0.1 ohm/sq
Fluid Resistance Mild Solvents
Ratings Commercial
REACH Compliant
Material Type Copper-Plated Nylon Rip-Stop
RoHS RoHS-10
Shelf Life 60 months
Material Thickness 0.005"
Shielding Effectiveness Moderate
Shielding Effectiveness Better
Durability Better
Shielding Abrasion Resistance Better
Shielding Material Copper Plated
Material Flexibility Better
Shielding Type Cloth
Min Temperature Moderate
Minimum Operating Temperature -40 ° F (-40 ° C )
Max Temperature Moderate
Maximum Operating Temperature 302 ° F (150 ° C )

Attentuation Chart

Attenuation data was obtained using MIL-DTL-83528H (modified). Testing was performed by accredited, third-party EMI laboratories.

Specifications subject to change without notice. All statements and technical information contained herein are based on tests we believe to be reliable, but the accuracy or completeness is not guaranteed under all circumstances. Before using Zippertubing® products, the user shall determine suitability for the intended use, and user assumes all responsibility for improper selection. Published attenuation values of Zippertubing® shielding have been verified by laboratory testing of the respective shielding materials. Actual installed attenuation values may differ due to installation techniques and final assembly operation parameters which are beyond the control of Zippertubing®. Actual attenuation values can only be determined by the end user testing the completed assembly. U.S. and International Patents and patents pending. © 2021 The Zippertubing® Company, Chandler, Arizona.