Zippertubing has been building quality products and solutions since 1957 image Building Quality Products & Solutions Since 1957

Shrink-N-Shield® (FE)

Drawing No. ZT03-18-003

Part No. ZT03-18-003-0.1875-B-X48.0

One-Step Shielding and Jacketing Tubing, 2:1 Shrink Ratio, High Temperature Fluoroelastomer

  • Easy One-Step Installation
  • High Performance Mil-Spec Jacketing
  • Excellent High Frequency EMI Shielding
  • Extreme High Temperature & Solvent Resistance
  • Lower Installed Cost

Diameter Before Shrinkage


Estimated Shipping: 1-7 Business Days

Shrink-N-Shield (FE) combines two proven technologies into a single, easy to install product for adding EMI shield protection to wire and cable bundles with diameters of 1.0" and less. Makes adding an EMI shield or secondary EMI shielding to wire and cable a snap. The product is comprised of SAE-AMS-DTL-23053/13 flexible Fluoroelastomer heat shrink tubing and Zippertubing's Z-3250-CN conductive cloth which has outstanding shielding properties. The outer tubing is a high temperature, rubber-like jacket which is highly fluid resistant and flame retardant. The operational temperature of this composite product is 175°C, but it can withstand short spikes to 200°C. This product is supplied in four foot long sticks.

Related Products

Product Specifications

RoHS Compliant
Shelf Life 60 months
Minimum Operating Temperature -40 ° F (-40 ° C )
Maximum Operating Temperature 250 ° F (121 ° C )

Available Attributes

Please contact us for custom needs. We have a solution for you!

Shape of Installation Round
Diameter Before Shrinkage 0.1875" 0.25" 0.375" 0.5" 0.75" 1.0" 1.5"
Unit Length 4 ft. Sticks
Exterior Material Fluoroelastomer Heat Shrink
Shielding Z-3250-CN
Material Color Black
Shield Bonding Nitrile Adhesive

Sizing Chart: ZT03-18-003

Inside Diameter (inches)
Inside Diameter (inches)
Wall Thickness (inches)
0.1875 3/16 0.093 0.035
0.25 1/4 0.125 0.035
0.375 3/8 0.188 0.035
0.5 1/2 0.25 0.035
0.75 3/4 0.375 0.042
1 1.0 0.5 0.049
1.5 1-1/2 0.75 0.055
2 2.0 1 0.065
Shielding Effectiveness

Material Specifications

Specifications subject to change without notice. All statements and technical information contained herein are based on tests we believe to be reliable, but the accuracy or completeness is not guaranteed under all circumstances. Before using Zippertubing® products, the user shall determine suitabilituriy for the intended use, and user assumes all responsibility for improper selection. Published attenuation values of Zippertubing® shielding have been verified by laboratory testing of the respective shielding materials. Actual installed attenuation values may differ due to installation techniques and final assembly operation parameters which are beyond the control of Zippertubing®. Actual attenuation values can only be determined by the end user testing the completed assembly. U.S. and International Patents and patents pending. © 2019 The Zippertubing® Company, Chandler, Arizona.

Speak to an Engineer Today!

We have highly experienced and friendly engineers on site ready to assist you in all your projects.