ISO 9001 / IATF 16949
The ZTZ-SP tool is a Stainless Steel plier tool designed for closing Zippertubing Z-Track products. It is required for all Z-Track installations. The small hand held plier tool utilizes small finger lips to spread the channel cavity of the Z-Track extrusion. At the same time the arrowhead side of the extrusion is forced into the open channel cavity. As the tool slides along the cable run the channel cavity closes behind the tool which traps the arrowhead barbs within. The tool makes closing Z-Track fast and easy while minimizing operator fatigue. As the tool slides along the cable run, it will form the jacket material into a continuous tube. Use the ZTZ-SP tool for all production line and field installations. Refer to the "How to Use" document for detailed instructions on ZTZ-SP tool.
Specifications subject to change without notice. All statements and technical information contained herein are based on tests we believe to be reliable, but the accuracy or completeness is not guaranteed under all circumstances. Before using Zippertubing® products, the user shall determine suitabilituriy for the intended use, and user assumes all responsibility for improper selection. Published attenuation values of Zippertubing® shielding have been verified by laboratory testing of the respective shielding materials. Actual installed attenuation values may differ due to installation techniques and final assembly operation parameters which are beyond the control of Zippertubing®. Actual attenuation values can only be determined by the end user testing the completed assembly. U.S. and International Patents and patents pending. © 2019 The Zippertubing® Company, Chandler, Arizona.