SH1 Ground Clamp Jacket Preparation

Step 1: Cut Zippertubing jacket 2.0 inches longer than the cable length for each end that will be grounded.

Step 2: Pull the stitching from the braid back 2.0 inches from the end of the jacket and then cut off the loose braid. Cut the loose portion of track “A” and along the edge of the track “B” back 2.0 inches each.

Step 3: Fold 1.0 inches of jacket back onto itself and crease firmly.

Step 4: Wrap Zippertubing around cable and zip closed. Attach connector ground clamp hardware over exposed Zippertubing foil surface.