Zippertubing has been building quality products and solutions since 1957 image Building Quality Products & Solutions Since 1957
Hook-and-Loop  (Polyester) with Drawing Number: 5104

Hook-and-Loop (Polyester)

Specification No. 5104

Resealable Synthetic Fiber Fastener Tape

  • Non-metallic Hook & Loop tapes
  • Flexible, Tooless and Re-Sealable
  • All Jacket and EMI Shield materials available
  • Round, Flat and Rectangular cable shapes
  • Avoid Fluid, Dirt and Clean Room applications
  • Avoid high torsional twist and load applications

Raw materials are not sold separately, please contact the sales department for any special requirements.

Material Specifications

Available Attributes

Material Color Black
Hook and Loop - Width 1" 2" 0.625"

Hook-and-Loop (Polyester)

RoHS Compliant
Material Polyester
Mil-Spec A-A-55126A, Type II, Class 3 Formerly Mil-F-21840 Type II, Class 3.
Material Thickness 0.125"
Shelf Life 36 Months
Temperature Range -57° to 93°C (-71° to 199°F)

Specifications subject to change without notice. All statements and technical information contained herein are based on tests we believe to be reliable, but the accuracy or completeness is not guaranteed under all circumstances. Before using Zippertubing® products, the user shall determine suitability for the intended use, and user assumes all responsibility for improper selection. Published attenuation values of Zippertubing® shielding have been verified by laboratory testing of the respective shielding materials. Actual installed attenuation values may differ due to installation techniques and final assembly operation parameters which are beyond the control of Zippertubing®. Actual attenuation values can only be determined by the end user testing the completed assembly. U.S. and International Patents and patents pending. © 2019 The Zippertubing® Company, Chandler, Arizona.

The Hook and Loop closure consists of dissimilar woven tapes comprised of synthetic hook filaments on one side and loop fibers on the other. The closure is sealed when the hooks are forced into the loops causing the hook barbs to engage and catch the loop side. The hook barbs can be pulled out of the loops numerous times with only minor damage creating a closure that can be re-entered and resealed. This closure system can be used with all EMI Shielding material options in Round, Flat and Rectangular configurations with cable sizes of 1/2" and up. No tooling is required to open or close this system.

Speak to an Engineer Today!

We have highly experienced and friendly engineers on site ready to assist you in all your projects.

Sign up for our email list to stay up to date with all the latest and greatest at
The Zippertubing Company.

By clicking this button, you agree to our Terms and Privacy Policy.