Four Leg Metal Staple
A crimp-on, four-leg metal staple used for zipper termination.
- Nickel-plated brass
- Reinforces closure or terminates end use of zipper sliders
- Links other materials together for a stronger bond
Zipper-stops are low profile, nickel-plated brass staples. These zipper-stops terminate the end of a zipper slide and are easy to install. Alternatively, these staples can combine materials together for a strong reinforcement. The four legs are bent on the reverse side to create the secure stop or closure.
|Dimensions||.230" L x .120" W x .275" H|
|Material||Nickel plated Brass|
Specifications subject to change without notice. All statements and technical information contained herein are based on tests we believe to be reliable, but the accuracy or completeness is not guaranteed under all circumstances. Before using Zippertubing® products, the user shall determine suitability for the intended use, and user assumes all responsibility for improper selection. Published attenuation values of Zippertubing® shielding have been verified by laboratory testing of the respective shielding materials. Actual installed attenuation values may differ due to installation techniques and final assembly operation parameters which are beyond the control of Zippertubing®. Actual attenuation values can only be determined by the end user testing the completed assembly. U.S. and International Patents and patents pending. © 2020 The Zippertubing® Company, Chandler, Arizona.