Nylon Oxford Cloth

This nylon cloth leader facilitates an easier pull-through method for component installation.
  • Provides ample water repellency and resistance to mildew and cloth rot
  • Facilitates an easier pull-through method for wire or cable installation
  • Offers compatibility with many other custom products and applications

Material Specification No. 1108

Raw materials are not sold separately, please contact the sales department for any special requirements.


A woven fabric cloth leader utilized in pull-through products for easy installation.

This nylon cloth leader makes pulling wires through a breeze. This cloth leader is a woven fabric made from DuPont® Type 6, mid-dull nylon yarn. The leader has a urethane back-coated finish and weights 3.5 to 4.0 ounces per square yard. This material is water repellent and mildew resistant to outlast environments with fluid exposure.


Nylon Oxford Cloth

Finish Urethane back coated
Colors Navy Blue, or Black
Fabric 200 Denier, Type 6/6 Nylon
Minimum Operating Temperature -40 ° F (-40 ° C )
Maximum Operating Temperature 176 ° F (80 ° C )

Specifications subject to change without notice. All statements and technical information contained herein are based on tests we believe to be reliable, but the accuracy or completeness is not guaranteed under all circumstances. Before using Zippertubing® products, the user shall determine suitability for the intended use, and user assumes all responsibility for improper selection. Published attenuation values of Zippertubing® shielding have been verified by laboratory testing of the respective shielding materials. Actual installed attenuation values may differ due to installation techniques and final assembly operation parameters which are beyond the control of Zippertubing®. Actual attenuation values can only be determined by the end user testing the completed assembly. U.S. and International Patents and patents pending. © 2021 The Zippertubing® Company, Chandler, Arizona.