SAM-1000
3
Rugged, Aluminized Silicone Coated Fiberglass, Up to 240 C
- Ideal for Automotive, Truck & Bus Applications
- Heat Reflective Silicone Coated Fiberglass
- Good Abraision Protection
- Custom Shapes Available
- Many Closures Available
- -50 to 240°C Operating Limit
Material Specification No. 1210
Details
SAM-1000 is a heavy weight; Silicone impregnated fiberglass fabric with a heat reflective Aluminum Foil surface laminated on one side with a high temperature adhesive. The combination makes SAM-1000 a flexible and durable heat protection jacket material with outstanding abrasion characteristics. SAM-1000 is best in moderate temperature heat barrier applications where a mechanically tough jacket is required. The material has a thermal effectiveness value of 69+°C when tested to SAE J2302 requirements. These characteristics make SAM-1000 an ideal choice for under hood applications in the Automotive, Truck and Bus industry. The material has an operational temperature range of -50° to 240°C.
Specifications
| Chemical Resistance | Good |
|---|---|
| Configuration | Aluminized Silicone-Coated Woven Fiberglass |
| Flammability | Self-extinguishing |
| Tear Strength | >650/>600 N/cm (warp) | >550/>400 N/cm (fill) |
| REACH | Compliant |
| RoHS | RoHS-10 |
| Shelf Life | 60 months |
| Material Thickness | 0.033" |
| Material Thickness Variance | -0.003" to +0.005" |
| Minimum Operating Temperature | -58 ° F (-50 ° C ) |
| Maximum Operating Temperature | 464 ° F (240 ° C ) |
| Flexibility | Better |
Available Attributes
| Material Color | Aluminum |
|---|
Specifications subject to change without notice. All statements and technical information contained herein are based on tests we believe to be reliable, but the accuracy or completeness is not guaranteed under all circumstances. Before using Zippertubing® products, the user shall determine suitability for the intended use, and user assumes all responsibility for improper selection. Published attenuation values of Zippertubing® shielding have been verified by laboratory testing of the respective shielding materials. Actual installed attenuation values may differ due to installation techniques and final assembly operation parameters which are beyond the control of Zippertubing®. Actual attenuation values can only be determined by the end user testing the completed assembly. U.S. and International Patents and patents pending. © 2021 The Zippertubing® Company, Chandler, Arizona.
Engineering Team
The collective expertise of our in-house engineering team can provide you with endless ways to solve your component issues and create a solution — everything from conceptualizing to final product.
Tim Mead
Director of Operations
Tim earned his Bachelors of Science in Chemical Engineering from the University of Alabama in Huntsville. He has experience in the chemical processing industry optimizing throughput and efficiencies as well as experience in the aerospace and space industries where he worked on materials selection, design and processing for avionics, radar and satellite orientation systems. Tim is responsible for manufacturing operations and new process development.
Scott Yee
Engineer Manager
Scott earned his Bachelors of Science in Aerospace Engineering from Arizona State University in Tempe, AZ. He has experience in systems program management, aerospace systems, optical components, optical systems, semiconductor processing equipment, testing and R&D product development. Scott is currently responsible for overseeing design concepts, new product development and improvement of existing product lines.
Matt Hesselbacher
Principal Engineer
Matt earned his Bachelors of Science in Electrical Engineering from the University of Arizona in Tucson, AZ. He has many years of experience in the aerospace industry designing electrical subsystems and cable harnesses for missiles and satellite launch systems. Matt is currently responsible for product training, EMI shielding design, new product development, and legacy product support.
Jonathan Speirs
Senior Production Engineer
Jonathan earned his Bachelors of Science in Manufacturing Engineering Technology from Brigham Young University in Provo, UT. He has experience designing products, fixtures, gauges, and other manufacturing aids to ensure streamlined processing of material through each phase of production. Jonathan is currently involved in new product development, manufacturing support, and automotive tooling & fixture design.
Madison Lenschow
Design Engineer
Madison earned her Bachelors of Science in Mechanical Engineering from Northern Arizona University in Flagstaff, AZ. She has experience developing and testing mobility systems and prototype electro-mechanical systems. Madison is responsible for new product development, field support for product installations, and general product training.
Taylor Black
Material Engineer
Taylor earned his Bachelors of Science in Polymer Science & Engineering from Case Western Reserve University in Cleveland, OH. He has experience developing various material compounds and optimizing their performance characteristics by adjusting process parameters and incorporating additives. Taylor is responsible for new product and materials testing as well as material and process refinement based on industry specific requirements.
-
Tim Mead
Director of Operations
Tim earned his Bachelors of Science in Chemical Engineering from the University of Alabama in Huntsville. He has experience in the chemical processing industry optimizing throughput and efficiencies as well as experience in the aerospace and space industries where he worked on materials selection, design and processing for avionics, radar and satellite orientation systems. Tim is responsible for manufacturing operations and new process development.
-
Scott Yee
Engineer Manager
Scott earned his Bachelors of Science in Aerospace Engineering from Arizona State University in Tempe, AZ. He has experience in systems program management, aerospace systems, optical components, optical systems, semiconductor processing equipment, testing and R&D product development. Scott is currently responsible for overseeing design concepts, new product development and improvement of existing product lines.
-
Matt Hesselbacher
Principal Engineer
Matt earned his Bachelors of Science in Electrical Engineering from the University of Arizona in Tucson, AZ. He has many years of experience in the aerospace industry designing electrical subsystems and cable harnesses for missiles and satellite launch systems. Matt is currently responsible for product training, EMI shielding design, new product development, and legacy product support.
-
Jonathan Speirs
Senior Production Engineer
Jonathan earned his Bachelors of Science in Manufacturing Engineering Technology from Brigham Young University in Provo, UT. He has experience designing products, fixtures, gauges, and other manufacturing aids to ensure streamlined processing of material through each phase of production. Jonathan is currently involved in new product development, manufacturing support, and automotive tooling & fixture design.
-
Madison Lenschow
Design Engineer
Madison earned her Bachelors of Science in Mechanical Engineering from Northern Arizona University in Flagstaff, AZ. She has experience developing and testing mobility systems and prototype electro-mechanical systems. Madison is responsible for new product development, field support for product installations, and general product training.
-
Taylor Black
Material Engineer
Taylor earned his Bachelors of Science in Polymer Science & Engineering from Case Western Reserve University in Cleveland, OH. He has experience developing various material compounds and optimizing their performance characteristics by adjusting process parameters and incorporating additives. Taylor is responsible for new product and materials testing as well as material and process refinement based on industry specific requirements.
