Uninsulated Wire Terminals
Ring Terminals 14-16 AWG
Material Specification No. 7001-I-8
Raw materials are not sold separately, please contact the sales department for any special requirements.
Zippertubing's tin-crimp type, uninsulated ring terminals are the perfect choice when terminating a wire or ground. The crimp-barrel seams allow a stronger termination. Simply attach the end of this terminal to a stud or post.
These terminals are available in many different sizes and configurations, and can be pre-installed on any custom-engineered solution.
|Wire Gauge||14-16 AWG|
|Stud/Post Size||#10 #8 0.375" (3/8) #4 0.3125" 0.25" (1/4)|
Specifications subject to change without notice. All statements and technical information contained herein are based on tests we believe to be reliable, but the accuracy or completeness is not guaranteed under all circumstances. Before using Zippertubing® products, the user shall determine suitability for the intended use, and user assumes all responsibility for improper selection. Published attenuation values of Zippertubing® shielding have been verified by laboratory testing of the respective shielding materials. Actual installed attenuation values may differ due to installation techniques and final assembly operation parameters which are beyond the control of Zippertubing®. Actual attenuation values can only be determined by the end user testing the completed assembly. U.S. and International Patents and patents pending. © 2021 The Zippertubing® Company, Chandler, Arizona.